User's Manual

40
KNG User’s Manual
41
RELM/BK Radio
Menu Operation
P25 ID
LIGT T/A MENU PR1
TXD SCAN
!
Channel Scan
Unit Call
PRI Scan
ESC ▲ ▼ ENT
Unit Call
→
Last Call
Call List
ESC ▲ ▼ ENT
Call List
→
Call 1 Label
Call 2 Label
ESC ▲ ▼ ENT
Enter ID
ID -
ESC ▲ ▼ ENT
Press the 'Menu' button.1.
Use the up/down buttons to select 'Unit 2.
Call'
Use the up/down buttons to select the 3.
desired Unit 'Call' option.
Press 'ENT' to enter Unit Call Mode.4.
Display shows phone icon and P25 ID in
use.
Last Call = Use the P25 ID of the last Call.
'ENT' initiates call.
Call List = Use the programmed P25 ID List.
'ENT' brings up programmed Call List.
Use the up/down button to select the
desired ID.
Press 'ENT' to initiate the call.
Enter ID = Enter a numeric P25 ID.
'ENT' brings up 'Enter ID' menu.
Use the keypad to enter the desired ID.
Press 'ENT' to initiate the call.
5. Press the 'ESC' button to return to
normal operation.
Unit-to Unit Callback
If enabled, pressing PTT during the hold time results in a Unit-to-Unit
call to the received unit ID.
Call List Programming
If enabled with the PC radio editor, the P25 Call List can edited via the
radio's keypad programming function. (See Keypad Programming)
Encryption Options
Tx Secure (TXS)
When SEC is on, encrypted channels programmed for switchable
encryption will transmit an encrypted signal.
NOTE: The SEC switch has no effect on channels programmed as
Encrypted or Clear Only channels.
Toggle switch operation
On - Slide the programmed switch toward the front of the radio.
Off - Slide the switch up toward the channel select switch.
Button Operation
On - Press the programmed button.
TXS
Off - Press the button again. TXS
Menu Operation
Secure Tx
→
Clear
Secure
ESC ▲ ▼ ENT
Channel Scan
TX Secure
PRI Scan
ESC ▲ ▼ ENT
TXD
Press the assigned Menu button.1.
Use the up/down buttons to select 'TX 2.
Secure'.
Press the 'ENT' button.3.
Use the up/down buttons to select 4.
Secure or Clear.
Press the 'ENT' button to set the 5.
selection.
Hold the 'ESC' button to return to 6.
normal operation.