User's Manual

38
KNG User’s Manual
39
RELM/BK Radio
Unit-to-Unit Call Options
Individual Call (U2U)
P25 Unit IDs allow for Unit-To-Unit calls when the radio is operating in
Digital Mode. The function must be enabled by radio programming to
allow this mode of operation.
Channels programmed for analog only operation will not be able to
transmit or receive Unit-To-Unit calls.
Button Operation
P25 ID
LIGT T/A MENU PR1
TXD SCAN
!
Unit Call
→
Last Call
Call List
ESC ▲ ▼ ENT
Call List
→
Call 1 Label
Call 2 Label
ESC ▲ ▼ ENT
Enter ID
ID -
ESC ▲ ▼ ENT
Press the programmed button. 'U2U'1.
Use the up/down buttons to select the 2.
desired Unit 'Call' option.
Press 'ENT' to enter Unit Call Mode.3.
Display shows phone icon and P25 ID in use.
Last Call = Use the P25 ID of the last Call.
'ENT' initiates call.
Call List = Use the programmed P25 ID List.
'ENT' brings up programmed Call List.
Use the up/down button to select the
desired ID.
Press 'ENT' to initiate the call.
Enter ID = Enter a numeric P25 ID.
'ENT' brings up 'Enter ID' menu.
Use the keypad to enter the desired ID.
Press 'ENT' to initiate the call.
4. Press the 'ESC' button to return to normal
operation.
Pacing an Emergency Call
15
1
2
3
4
5
6
7
8
9
11
10
12
13
14
16
SCAN
PRI
VOL
LIGT T/A MENU PR1
TXD
EMERGENCY
KNG-P150 P25
To place an emergency call, press and hold
the programmed emergency button until the
radio beeps and the display ß ashes "EMER-
GENCY".
Radio automatically sends the emergency
signal on the selected or pre-programmed
emergency channel.
Cycle power to return the radio to normal op-
eration.
Receiving an Emergency Signal
LIGT T/A MENU LCK
RXD
EMERGENCY
Unit ID 12345
To receive an emergency call, the radio's
receive mode must be programmed to Digital
or Mixed.
When receiving a qualiÞ ed emergency call,
the radio will beep. The the display will ß ash
the word ‘EMERGENCY’ and the P25 ID of
the radio sending the signal for the duration of
the reception, and during any hold time. The
RXD icon will also be lit.