User's Manual

36
KNG User’s Manual
37
RELM/BK Radio
Scan List Add/Delete
A menu item can be programmed to add or remove channels from the
scan list. Channels currently in the scan list will show 'SCN' in the top
line of the display.
Zone Select
Scan List
PRI Scan
ESC ▲ ▼ ENT
TXD
Channel Scan
+Channel 01
Channel 02
ESC ▲ ▼ ENT
To edit the Scan List:
Press the assigned Menu button.1.
Use the up/down buttons to select 'Scan 2.
List' add or delete.
Press 'ENT'3.
Use the up/down buttons to select the 4.
desisred channel. Or enter the channel
number with the numeric keypad.
Use the +/- button to add or delete 5.
the channel from the Scan List.
Channels preceded by '+' are Scan List
channels
Press 'ENT'6.
Hold 'ESC' to return to normal radio operation.7.
Zone Scan (ZSCN)
Ch 1
KNG-P150 P25
171.58500 MHz
LIGT T/A MENU LCK
Ch 1
KNG-P150 P25
171.58500 MHz
LIGT T/A MENU LCK
RXDN SCAN
SCAN
When Zone Scan is turned on, the radio scans
all programmed scan channels in zones
programmed as Zone Scan zones.
Toggle switch operation
On - Slide the programmed switch toward the
front of the radio.
Off - Slide the switch up toward the channel
select switch.
Button Operation
On - Press the programmed button.
ZSCN
Off - Press the button again. ZSCN
Menu Operation
Press the assigned Menu button.1.
Use the up/down buttons to select 'Zone Scan'.2.
Press the 'ENT' button.3.
Use the up/down buttons to select On or Off.4.
Press the 'ENT' button to set the selection.5.
Hold the 'ESC' button to return to normal operation..6.
Zone Scan List Add/Delete
A menu item can be programmed to add or remove Zones to the Zone
Scan List.
To add a zone to the Scan List:
Zone Scan
ZONE 1
+
ZONE 2
ESC ▲ ▼ +/-
Ch 1
KNG-P150 P25
171.58500 MHz
LIGT T/A MENU LCK
RXD SCN
Talkaround
Tx Power
Zone Scn List
ESC ▲ ▼ ENT
Press the Menu button.1.
Use the up/down buttons to select 'Zone 2.
Scan List'.
Press the 'ENT' button.3.
Use the up/down buttons to select the 4.
zone to add or delete.
Press the +/- button to toggle the 5.
selection. Zones in the scan list will be
proceeded by a '+' symbol.
Hold the 'ESC' button to return to 6.
normal operation..
Emergency Signalling Options
The KNG portable radio supports P25 Emergency Operation. When
Emergency Operation is engaged the radio will transmit the P25 ID
of the radio along with the required P25 Emergency bit. Emergency
operation applies only to channels programmed for Digital or Mixed Mode
transmissions.
On channels programmed for analog transmissions, pressing PTT in
Emergency Mode will result in a normal analog transmission.
On channels programmed for Mixed Mode transmissions, pressing PTT
will result in a digital transmission, regardless of the position of the ‘TX
Digital’ switch.
All scanning and priority functions will be disabled during Emergency
operation.
Depending on the radio's PC programmable settings, emergency signal
will be sent automatically or with each Push-to-Talk.