User's Manual
Table Of Contents
- Front
- Contents
- Introduction
- FCC Requirements
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Trunking Channel Basic Operation
- Scan Options
- Pick List Options
- Unit-to-Unit Call Options
- Emergency Signalling Options
- Encryption Operation
- Messaging
- Paging and Call Alert
- Radio Inhibit/Enable [INH]/[UNINH]
- Other Options and Functions
- Backlight [LITE]
- Busy Channel Operation
- Channel Select [CHAN]
- Cloning
- Control Lockout [LCK]
- Keypad Programming
- Monitor [MON]
- Nuisance Channel Delete [DEL]
- Radio info
- Repeater Talkaround [T/A]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXAD]
- Transmit Power [PWR]
- Keypad Programming
- Warranty
- 90 -
KNG Mobile Manual
Displayed Information Lines
The three main display lines can be programmed to display radio information.
Select top, middle or bottom line to change it’s displayed information. Then select
the desired setting from the list (see table).
NOTE: Display changes do not affect the display on trunked channels.
Conventional Display Line Options
None No information is displayed.
Channel Label Programmed label of current channel.
Frequency Current operating frequency.
Channel Number Channel number of currently operating channel.
Channel # and Zone
Label
Number of currently selected channel followed by the
label of the currently select zone.
Rx’d Unit ID P25 ID of a received digital signal. If the incoming ID is
programmed in your Unit ID Call List list, the associated
label will be displayed. During standby you radio ID
number is displayed.
Rx’d TGID Talk Group ID of a received digital signal.
Rx Subaudible Received Code Guard tone value.
Contents