User's Manual
Table Of Contents
- Front
- Contents
- Introduction
- FCC Requirements
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Trunking Channel Basic Operation
- Scan Options
- Pick List Options
- Unit-to-Unit Call Options
- Emergency Signalling Options
- Encryption Operation
- Messaging
- Paging and Call Alert
- Radio Inhibit/Enable [INH]/[UNINH]
- Other Options and Functions
- Backlight [LITE]
- Busy Channel Operation
- Channel Select [CHAN]
- Cloning
- Control Lockout [LCK]
- Keypad Programming
- Monitor [MON]
- Nuisance Channel Delete [DEL]
- Radio info
- Repeater Talkaround [T/A]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXAD]
- Transmit Power [PWR]
- Keypad Programming
- Warranty
- 82 -
KNG Mobile Manual
Radio info
Conventional and Trunking Channels
Radio information can be assigned as a menu item.
When selected, the LCD displays programmed radio settings.
Repeater Talkaround [T/A]
Conventional Channels
In Repeater Talkaround mode, the radio will transmit on the programmed receive
frequency of the selected channel. When T/A is enabled the icon will be
displayed on the top line of the LCD.
NOTE: Channels programmed as receive only are not affected by the Talkaround
selection.
Talkaround selection can be assigned to a button or as a menu list item.
Squelch Adjust [SQL]
Conventional Channels
Squelch Adjust is used to change the signal strength required for the radio’s speaker
to unmute.
Squelch can be assigned as a button or menu list item.
Contents