User's Manual
Table Of Contents
- Front
- Contents
- Introduction
- FCC Requirements
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Trunking Channel Basic Operation
- Scan Options
- Pick List Options
- Unit-to-Unit Call Options
- Emergency Signalling Options
- Encryption Operation
- Messaging
- Paging and Call Alert
- Radio Inhibit/Enable [INH]/[UNINH]
- Other Options and Functions
- Backlight [LITE]
- Busy Channel Operation
- Channel Select [CHAN]
- Cloning
- Control Lockout [LCK]
- Keypad Programming
- Monitor [MON]
- Nuisance Channel Delete [DEL]
- Radio info
- Repeater Talkaround [T/A]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXAD]
- Transmit Power [PWR]
- Keypad Programming
- Warranty
- 80 -
KNG Mobile Manual
Keypad Programming
Conventional Systems and Channels
Much of the information stored in the KNG can be edited using the keypad. Four
separate programming functions can be enabled with the PC Radio Editor software.
Refer to the Keypad Programming section for detailed information on how to edit
programmed radio information.
Monitor [MON]
Conventional Channels
There are four settings available for monitoring trafc on a selected channel.
“Monitor” can be assigned to a button or as a menu item.
Monitor Modes and Indicators
Selective - Digital channels only. Required for Unit-to-Unit calls and Talkgroup
use. (No indicator)
Normal - Requires NAC or Tone. Ignores Talkgroup and Unit-to-Unit
information on digital channels. Flashing when selected.
Monitor - Monitors activity on selected channel. Steady when selected.
Open - Open Squelch. Solid when selected.
Contents