User's Manual
Table Of Contents
- Front
- Contents
- Introduction
- FCC Requirements
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Trunking Channel Basic Operation
- Scan Options
- Pick List Options
- Unit-to-Unit Call Options
- Emergency Signalling Options
- Encryption Operation
- Messaging
- Paging and Call Alert
- Radio Inhibit/Enable [INH]/[UNINH]
- Other Options and Functions
- Backlight [LITE]
- Busy Channel Operation
- Channel Select [CHAN]
- Cloning
- Control Lockout [LCK]
- Keypad Programming
- Monitor [MON]
- Nuisance Channel Delete [DEL]
- Radio info
- Repeater Talkaround [T/A]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXAD]
- Transmit Power [PWR]
- Keypad Programming
- Warranty
- 74 -
KNG Mobile Manual
Radio Inhibit/Enable [INH]/[UNINH]
Conventional Digital Channels
With “Inhibit” assigned to a button or menu function, a KNG Radio can temporarily
disable other KNG radios using the targeted radio’s unit ID number.
The disabled radio can only be re-enabled by sending an “Unhibit” command.
NOTE: Inhibited radios cannot be read with the Neovision radio editor.
Sending a command
To initiate an inhibit/uninhibit message press the programmed button or select from
the menu.
Use the keypad to enter the Administrator password.
Press “ENTER” to open the menu.
Select Target Radio
Last Call
Select “Last Call” to send the message to radio you last sent an inhibit or uninhbit
message. Press “SEND” to send the message.
Contents