User's Manual
Table Of Contents
- Front
- Contents
- Introduction
- FCC Requirements
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Trunking Channel Basic Operation
- Scan Options
- Pick List Options
- Unit-to-Unit Call Options
- Emergency Signalling Options
- Encryption Operation
- Messaging
- Paging and Call Alert
- Radio Inhibit/Enable [INH]/[UNINH]
- Other Options and Functions
- Backlight [LITE]
- Busy Channel Operation
- Channel Select [CHAN]
- Cloning
- Control Lockout [LCK]
- Keypad Programming
- Monitor [MON]
- Nuisance Channel Delete [DEL]
- Radio info
- Repeater Talkaround [T/A]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXAD]
- Transmit Power [PWR]
- Keypad Programming
- Warranty
- 64 -
KNG Mobile Manual
Sending a Message
To initiate a text message press the “TXT” button or select “Text Message” from the
menu.
Select “Send” from the menu and press “ENTER”.
Select Message Type
From the “Select Entry Type” menu, choose the type of message to send and press
“ENTER”.
Predened List or Manual Entry List
When “Predened List” or “Manual Entry List” is selected, a list of available
messages is displayed.
Select the message to be sent and press “ENTER”.
NOTE: When sending a predened message the message ID is transmitted. The
receiving radio will display the message programmed with the corresponding ID.
If the receiving radio has no programmed message with the transmitted ID, “Text
Message X” is displayed, where “X” is the received message ID number.
Manual Entry
When “Manual Entry” is selected use the keypad to enter the desired message
(see keypad character table). Press “ENTER” to select the target radio.
Contents