User's Manual
Table Of Contents
- Front
- Contents
- Introduction
- FCC Requirements
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Trunking Channel Basic Operation
- Scan Options
- Pick List Options
- Unit-to-Unit Call Options
- Emergency Signalling Options
- Encryption Operation
- Messaging
- Paging and Call Alert
- Radio Inhibit/Enable [INH]/[UNINH]
- Other Options and Functions
- Backlight [LITE]
- Busy Channel Operation
- Channel Select [CHAN]
- Cloning
- Control Lockout [LCK]
- Keypad Programming
- Monitor [MON]
- Nuisance Channel Delete [DEL]
- Radio info
- Repeater Talkaround [T/A]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXAD]
- Transmit Power [PWR]
- Keypad Programming
- Warranty
- 58 -
KNG Mobile Manual
Basic Operation
The receiver automatically detects both clear and secure signals.
The transmitter selects clear or secure operation based on each channel’s
programming. Digital channels can be programmed to always transmit encrypted,
always transmit clear, or to select the encryption mode with the TX Secure switch.
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
Channel 16
Secure One
155.645 MHz
SEC ZONE AUX1
SCAN
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
Channel 16
Secure One
155.645 MHz
SEC ZONE AUX1
SCAN
RXD
The display indicates Secure Operation as follows:
In Standby Mode, if the radio will transmit in Secure
Mode when PTT is pressed, the encrypt icon is
displayed.
When receiving or transmitting an encrypted signal,
the encrypt icon is displayed.
Contents