User's Manual
Table Of Contents
- Front
- Contents
- Introduction
- FCC Requirements
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Trunking Channel Basic Operation
- Scan Options
- Pick List Options
- Unit-to-Unit Call Options
- Emergency Signalling Options
- Encryption Operation
- Messaging
- Paging and Call Alert
- Radio Inhibit/Enable [INH]/[UNINH]
- Other Options and Functions
- Backlight [LITE]
- Busy Channel Operation
- Channel Select [CHAN]
- Cloning
- Control Lockout [LCK]
- Keypad Programming
- Monitor [MON]
- Nuisance Channel Delete [DEL]
- Radio info
- Repeater Talkaround [T/A]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXAD]
- Transmit Power [PWR]
- Keypad Programming
- Warranty
- 55 -
KNG Mobile Manual
Emergency Signalling Options
Conventional Digital and Trunking Channels
The KNG mobile radio supports P25 Emergency Operation. When Emergency
Operation is engaged the radio will transmit the P25 ID of the radio along with the
required P25 Emergency bit. P25 Emergency operation applies only to channels
programmed for Digital or Mixed Mode transmissions.
On channels programmed for analog transmissions, pressing PTT in Emergency
Mode will result in an MDC emergency analog transmission. The system MDC ID
and emergency information is transmitted.
On channels programmed for Mixed Mode transmissions, pressing PTT will result in
a digital or analog emergency transmission, dependant on the ‘TX Digital’ setting or
selection.
All scanning and priority functions will be disabled during Emergency operation.
Depending on the radio’s PC programmable settings, emergency signal will be sent
automatically or with each Push-to-Talk.
Contents