User's Manual
Table Of Contents
- Front
- Contents
- Introduction
- FCC Requirements
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Trunking Channel Basic Operation
- Scan Options
- Pick List Options
- Unit-to-Unit Call Options
- Emergency Signalling Options
- Encryption Operation
- Messaging
- Paging and Call Alert
- Radio Inhibit/Enable [INH]/[UNINH]
- Other Options and Functions
- Backlight [LITE]
- Busy Channel Operation
- Channel Select [CHAN]
- Cloning
- Control Lockout [LCK]
- Keypad Programming
- Monitor [MON]
- Nuisance Channel Delete [DEL]
- Radio info
- Repeater Talkaround [T/A]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXAD]
- Transmit Power [PWR]
- Keypad Programming
- Warranty
- 53 -
KNG Mobile Manual
If there is no response to the call after 60 seconds, the radio exits the Unit-to-Unit
mode and returns to normal operation.
When receiving non unit-to-unit calls while in the unit call mode, the TGID of the
incoming trafc is displayed.
Receiving an Individual Unit Call
When a properly addressed unit call is received, an alert tone sounds and the LCD
displays the ID number or associate label of the radio placing the call.
Accept the call
To accept the call and respond in unit-to-unit mode, press “ACPT” and transmit
as normal.
To exit the Individual Call mode, press “Exit”
Ignore the call
To ignore the call and continue operating in normal mode, press “INGR”.
Call List Programming
If enabled with the PC radio editor, the P25 Call List for conventional channels can
be edited via the radio’s keypad programming function.
Contents