User's Manual

- 47 -
KNG Mobile Manual
Zone Scan [ZSCN]
Conventional Channels
When Zone Scan and Channel Scan are on, the radio scans all programmed scan
channels in zones designated as Zone Scan zones.
If allowed, the scanned zone list can be edited by the radio user. (See Zone Scan List).
When Zone Scan is on, the
Z
P
symbol will be shown at the top of the LCD display.
Zone Scan operation can be a button or menu list item and may be used in
conjunction with Priority Scan operation.
Zone Scan List [ZSC+]
Conventional Channels
The Zone Scan List allows the radio user to add or remove zones from the list of
zones to be scanned.
The Zone Scan List operation can be assigned as a button or menu list item.
When Zone Scan List is assigned to a button [ZSC+], press the button to add or
remove the currently operating zone from the scan list.
When assigned as a menu item, open the menu and select the Zone you wish to add
or remove from the scan list. Press “ENTER” to add or remove. Zones in the scan list
will be indicated with the  symbol.
Contents