User's Manual
Table Of Contents
- Front
- Contents
- Introduction
- FCC Requirements
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Trunking Channel Basic Operation
- Scan Options
- Pick List Options
- Unit-to-Unit Call Options
- Emergency Signalling Options
- Encryption Operation
- Messaging
- Paging and Call Alert
- Radio Inhibit/Enable [INH]/[UNINH]
- Other Options and Functions
- Backlight [LITE]
- Busy Channel Operation
- Channel Select [CHAN]
- Cloning
- Control Lockout [LCK]
- Keypad Programming
- Monitor [MON]
- Nuisance Channel Delete [DEL]
- Radio info
- Repeater Talkaround [T/A]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXAD]
- Transmit Power [PWR]
- Keypad Programming
- Warranty
- 37 -
KNG Mobile Manual
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
Channel 16
Secure One
155.645 MHz
CHAN+ ZONE AUX1
SCAN
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
Channel 16
Secure One
155.645 MHz
CHAN+ ZONE AUX1
SCAN
TXA
Analog receptions and transmissions will be
indicated by illuminating the A annunciator in
addition to the RX or TX annunciator.
Mixed Mode Talkback
If Mixed Mode Talkback is enabled, transmissions initiated while hold time remains
will be in the same mode as the received signal, if the signal was received on the
Ready to Transmit (RTX) channel. Depending on programming, the RTX channel
can be the main channel, a held scan or priority channel if Talkback Scan is enabled,
or the Priority 1 channel if “TX on PR1” is enabled. TX Mode on the RTX channel
must be set to MIXED.
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
Channel 16
Secure One
155.645 MHz
CHAN+ ZONE AUX1
SCAN
RXA
Press the PTT while the RX
indicator is shown
While hold time after a reception remains,
transmissions will be in the same mode as the
received signal, regardless of the status of the TX
Digital switch. As in Talkback Scan, the RTX channel
and receive annunciators will be displayed for the
duration of the timer.
Contents