User's Manual
Table Of Contents
- Front
- Contents
- Introduction
- FCC Requirements
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Trunking Channel Basic Operation
- Scan Options
- Pick List Options
- Unit-to-Unit Call Options
- Emergency Signalling Options
- Encryption Operation
- Messaging
- Paging and Call Alert
- Radio Inhibit/Enable [INH]/[UNINH]
- Other Options and Functions
- Backlight [LITE]
- Busy Channel Operation
- Channel Select [CHAN]
- Cloning
- Control Lockout [LCK]
- Keypad Programming
- Monitor [MON]
- Nuisance Channel Delete [DEL]
- Radio info
- Repeater Talkaround [T/A]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXAD]
- Transmit Power [PWR]
- Keypad Programming
- Warranty
- 33 -
KNG Mobile Manual
Code Guard/NAC Operation
Conventional Channels
Code Guard Transmit
Whenever transmitting on an analog channel, any programmed sub-audible Code
Guard is transmitted. Depending on radio programming, the Code Guard can be the
default tone assigned to the channel or a tone selected from the Code Guard Picklist
(see Pick List Options).
OK
Busy/TX LED
The frequency must be clear prior to transmitting on a Code
Guarded channel. If the LED Indicator is yellow do not transmit.
Busy Channel Lockout can be programmed to disallow transmitting
while a channel is busy.
1. Press the PTT switch. When the transmitter is on, the LED
Indicator glows red and TX appears in the display.
2 Talk in a normal voice with the microphone one to two inches
from your mouth.
3. Release the PTT switch to stop transmitting.
Contents