User's Manual
Table Of Contents
- Front
- Contents
- Introduction
- FCC Requirements
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Trunking Channel Basic Operation
- Scan Options
- Pick List Options
- Unit-to-Unit Call Options
- Emergency Signalling Options
- Encryption Operation
- Messaging
- Paging and Call Alert
- Radio Inhibit/Enable [INH]/[UNINH]
- Other Options and Functions
- Backlight [LITE]
- Busy Channel Operation
- Channel Select [CHAN]
- Cloning
- Control Lockout [LCK]
- Keypad Programming
- Monitor [MON]
- Nuisance Channel Delete [DEL]
- Radio info
- Repeater Talkaround [T/A]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXAD]
- Transmit Power [PWR]
- Keypad Programming
- Warranty
- 32 -
KNG Mobile Manual
Editing a Command Zone [CHAN-]
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
Channel 16
Secure One
155.645 MHz
CHAN+ ZONE AUX1
SCAN
When operating in a Command Zone, press the
“CHAN-” button to remove the selected channel from
the zone.
When a channel is deleted, the display momentarily
shows “Channel Deleted”, and the following channels
move up in the list. For example, if channel 5 is
deleted, channel 6 becomes the new channel 5,
channel 7 becomes the new channel 6, etc.
NOTE: Modications to a command zone channel, such as User Selected Tones, do
not affect the original standard zone channel.
Contents