User's Manual

- 31 -
KNG Mobile Manual
Command Zone Operation
The KNG portable radio allows construction of Command Zones drawn from any of
the programmed channels in standard operating zones. Each zone is designated as
a Standard Operating Zone or a Command Zone with the PC radio editor software.
Building a Command Zone [CHAN+]
To build a Command Zone the “Channel Add/Delete” function must be assigned to a
programmable button.
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
Channel 16
Secure One
155.645 MHz
CHAN+ ZONE AUX1
SCAN
While operating in a standard zone press the
“CHAN+” button to add the currently selected channel
to a command zone. The list of available command
zones will be displayed. Use the 'previous/next or up/
down buttons to select the zone to add the channel or
use the number keys to move directly to the desired
zone.
Pressing the “Enter” button copies the channel information to the rst available
channel slot in the selected command zone.
Example: If the command zone has three channels, the newly added channel will be
channel four.
Contents