User's Manual
Table Of Contents
- Front
- Contents
- Introduction
- FCC Requirements
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Trunking Channel Basic Operation
- Scan Options
- Pick List Options
- Unit-to-Unit Call Options
- Emergency Signalling Options
- Encryption Operation
- Messaging
- Paging and Call Alert
- Radio Inhibit/Enable [INH]/[UNINH]
- Other Options and Functions
- Backlight [LITE]
- Busy Channel Operation
- Channel Select [CHAN]
- Cloning
- Control Lockout [LCK]
- Keypad Programming
- Monitor [MON]
- Nuisance Channel Delete [DEL]
- Radio info
- Repeater Talkaround [T/A]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXAD]
- Transmit Power [PWR]
- Keypad Programming
- Warranty
- 27 -
KNG Mobile Manual
Channel/Zone Selector Knob
When programmed with the default setting, the channel/zone knob is used to select
a channel from the active zone. If programmed to select zones, active zones will be
selected with the knob.
Channels or zones may also be accessed via button, menu or keypad selection. See
below.
Button/Menu Item Selection
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
ESC PREV NEXT
ENTER
Channel Select
1: Channel One
2: Channel Two
3: Channel Three
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
ESC PREV NEXT
ENTER
Channel Select
1: Channel One
2: Channel Two
3: Channel Three
120
If programmed to a button, pressing the button will
display the list of available channels or zones. If
programmed as a menu item, the lists can be
displayed by selecting Zone or Channel select from
the menu list.
Use the Prev/Next or up/down buttons to scroll to the
desired selection.
Alternatively, the KAA0290 microphone number keys
can be used to jump directly to the desired channel or
zone.
Press ENT to go to the highlighted zone or channel.
Contents