User's Manual
Table Of Contents
- Front
- Contents
- Introduction
- FCC Requirements
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Trunking Channel Basic Operation
- Scan Options
- Pick List Options
- Unit-to-Unit Call Options
- Emergency Signalling Options
- Encryption Operation
- Messaging
- Paging and Call Alert
- Radio Inhibit/Enable [INH]/[UNINH]
- Other Options and Functions
- Backlight [LITE]
- Busy Channel Operation
- Channel Select [CHAN]
- Cloning
- Control Lockout [LCK]
- Keypad Programming
- Monitor [MON]
- Nuisance Channel Delete [DEL]
- Radio info
- Repeater Talkaround [T/A]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXAD]
- Transmit Power [PWR]
- Keypad Programming
- Warranty
- 104 -
KNG Mobile Manual
User Selectable Network Access Codes
The KNG can be pre-programmed with up to 32, user selectable NACs. NACS are
selected via a programmed button or menu item (see TX/RX Network Access Code
Picklist). If enabled, the tones can be programmed via the radio’s keypad.
Select “User NACs” from the programing menu.
Select the NAC to edit.
Enter the desired value in hexadecimal (000 - FFF).
NOTE: $F7E and $F7F are invalid as user selectable NAC values.
User Selectable Talkgroup IDs
The KNG can be pre-programmed with up to 32, user selectable TGIDs. TDIDs
are selected via a programmed button or menu item (see Talk Group ID Picklist). If
enabled, the TGIDs can be programmed via the radio’s keypad.
Select “User TGIDs” from the programing menu.
Select the Talk Group ID to edit.
Enter the desired value (1 - 65535).
NOTE: A Talk Group ID value of 0 is not allowed.
Contents