User's Manual
Table Of Contents
- Front
- Contents
- Introduction
- FCC Requirements
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Trunking Channel Basic Operation
- Scan Options
- Pick List Options
- Unit-to-Unit Call Options
- Emergency Signalling Options
- Encryption Operation
- Messaging
- Paging and Call Alert
- Radio Inhibit/Enable [INH]/[UNINH]
- Other Options and Functions
- Backlight [LITE]
- Busy Channel Operation
- Channel Select [CHAN]
- Cloning
- Control Lockout [LCK]
- Keypad Programming
- Monitor [MON]
- Nuisance Channel Delete [DEL]
- Radio info
- Repeater Talkaround [T/A]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXAD]
- Transmit Power [PWR]
- Keypad Programming
- Warranty
- 101 -
KNG Mobile Manual
User Selectable Code Guards
The KNG can be pre-programmed with up to 32, user selectable, CTCSS or CDCSS
subaudible tones. Tones are selected via a programmed button or menu item (see
TX/RX CxCSS Picklist). If enabled, the tones can be programmed via the radio’s
keypad
Select “User Tones” from the programing menu.
Select the tone to edit.
To enter a CTCSS tone select “Tone” and enter the desired frequency in Hertz (67.0
- 254.1 Hz).
To enter a CDCSS (digital) tone select “Digital” then enter the three digit code. Use
the INV button to invert the code.
Contents