User's Manual
Table Of Contents
- Front
- Contents
- Introduction
- FCC Requirements
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Trunking Channel Basic Operation
- Scan Options
- Pick List Options
- Unit-to-Unit Call Options
- Emergency Signalling Options
- Encryption Operation
- Messaging
- Paging and Call Alert
- Radio Inhibit/Enable [INH]/[UNINH]
- Other Options and Functions
- Backlight [LITE]
- Busy Channel Operation
- Channel Select [CHAN]
- Cloning
- Control Lockout [LCK]
- Keypad Programming
- Monitor [MON]
- Nuisance Channel Delete [DEL]
- Radio info
- Repeater Talkaround [T/A]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXAD]
- Transmit Power [PWR]
- Keypad Programming
- Warranty
- 100 -
KNG Mobile Manual
P25 ID Unit Call/Receive List
The KNG can be pre-programmed with up to 100 Project 25 IDs and labels. If ‘RX’d
Unit ID’ is designated as a display line, the P25 ID of the radio sending the call
will be shown when receiving a digital signal. If the P25 ID of the received call is
programmed in the Call List, the alphanumeric label associated with the ID will be
displayed. If the P25 ID is not in the Call List, the numeric P25 ID will be displayed.
Select “Call List” from the programing menu.
Select the P25 ID you wish to edit.
The display shows the label and P25 ID of the selected ID.
Select “Label” to edit or add an alphanumeric label
Select “Dest ID” to change the P25 ID
Contents