User's Manual
Table Of Contents
- Front
- Contents
- Introduction
- FCC Requirements
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Trunking Channel Basic Operation
- Scan Options
- Pick List Options
- Unit-to-Unit Call Options
- Emergency Signalling Options
- Encryption Operation
- Messaging
- Paging and Call Alert
- Radio Inhibit/Enable [INH]/[UNINH]
- Other Options and Functions
- Backlight [LITE]
- Busy Channel Operation
- Channel Select [CHAN]
- Cloning
- Control Lockout [LCK]
- Keypad Programming
- Monitor [MON]
- Nuisance Channel Delete [DEL]
- Radio info
- Repeater Talkaround [T/A]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXAD]
- Transmit Power [PWR]
- Keypad Programming
- Warranty
- 91 -
KNG Mobile Manual
Conventional Display Line Options
Rx DTMF Received DTMF digits.
Rx MDC Received MDC ID.
Rx Picklist Selections Current user selected receiver Code Guard, Network
Access Code and Talkgroup.
Tx Picklist Selections Current user selected transmit Code Guard, Network
Access Code and Talkgroup.
Rx/Tx Key Label of operating encryption key.
Zone Label Programmed label of current operating zone.
Zone and Channel # Current operating zone and channel numbers.
Zone Number Zone number of currently operating zone.
User Password
Select “User Password” from the “Global” menu to edit the keypad programming
password. Enter a six-digit numeric.
NOTE: Changing the user password does not affect the power-up or
administrator password.
Contents