User's Manual

- 43 -
KNG Mobile Operation
Priority Scan
Channel 16
Secure One
155.645 MHz
Z
P
P
H
P
1
TXD
Ø
MON SCAN PSCN
MENU
Channel 16
Secure One
155.645 MHz
R
Two channels can be designated as priority
channels. When Priority Scan is on, these
channels are monitored for incoming trafc.
When a qualied signal is detected the
speaker is opened to listen to the message.
If a message is detected on the channel
designated as Priority 2, the radio will
continue to monitor Priority 1 channel for
activity. If activity is detected the radio will
switch to the Priority 1 channel.
When used in conjunction with Channel Scan, the radio monitors the Priority channels
and will switch from a scanned channel to the Priority channel if a qualied signal is
detected.
Depending on radio setup, priority channels can be tied to the currently operating
zone or can be assigned to a specic channel regardless of the operating group.
Channels designated as Priority channels are identied by the P1 or P2 symbol at the
top of the LCD display. When Priority Scan is on, the
C
P
symbol will be shown.
Priority Scan operation can be assigned as a touch screen or menu list item or on a
microphone function button.
Priority Scan is either On or Off.
If allowed, Priority Channels can be changed by the user. (See Priority Channel Select.)
Index