User's Manual
Table Of Contents
- Introduction
- FCC Requirements
- Industry Canada Compliance
- Information and Options
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Trunking Channel Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Scan Options
- Encryption Operation
- User Pick List Options
- Emergency Signaling
- Messaging Options
- Paging and Call Alert
- Other Functions & Options
- Backlight [LITE]
- Cloning
- Control Lockout [LOCK]
- Date and Time [DATE]
- Global Positioning [GPS]
- Hard Power Down [PWRD]
- Home [HOME]
- Inhibit/Uninhibit [INH]/UINH]
- Keypad Programming
- Minimum Volume [VOL]
- Monitor [MON]
- Nuisance Channel Delete [NUIS]
- Phone [PHN] and Hang Up [HANG]
- Radio Accountability Tone [RAT]
- Radio Info
- Repeater Talkaround [T/A]
- Send Alert Tone [SNDT]
- Send Signal [SEND]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXD]
- Transmit Power [PWR]
- Two-Tone Select [TONE]
- Versions
- Zone Select [ZONE]
- Keypad Programming Options
- 90 -
KNG Mobile Operation
Zone Select [ZONE]
Conventional and Trunked Channels
Zone Select allows the radio user to switch between programmed channel zones.
The Zone Select operation can be assigned to a touch screen button, menu list item
or a microphone function button.
When Zone is assigned to the touch screen or as a microphone function button,
press the button to open the menu of available zones.
When assigned as a menu item, open the menu as described in the Navigation
section.
Select the Zone you want to use.
Press "ENTER" select the Zone.
Additionally, the channel select knob can be used to change the operating zone.
Also, If enabled, a zone can also be accessed directly for the microphone keypad.
(Refer to your PC Radio Editor documentation.)
(See also, Channel/Zone Selection Options.)