User's Manual
Table Of Contents
- Introduction
- FCC Requirements
- Industry Canada Compliance
- Information and Options
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Trunking Channel Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Scan Options
- Encryption Operation
- User Pick List Options
- Emergency Signaling
- Messaging Options
- Paging and Call Alert
- Other Functions & Options
- Backlight [LITE]
- Cloning
- Control Lockout [LOCK]
- Date and Time [DATE]
- Global Positioning [GPS]
- Hard Power Down [PWRD]
- Home [HOME]
- Inhibit/Uninhibit [INH]/UINH]
- Keypad Programming
- Minimum Volume [VOL]
- Monitor [MON]
- Nuisance Channel Delete [NUIS]
- Phone [PHN] and Hang Up [HANG]
- Radio Accountability Tone [RAT]
- Radio Info
- Repeater Talkaround [T/A]
- Send Alert Tone [SNDT]
- Send Signal [SEND]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXD]
- Transmit Power [PWR]
- Two-Tone Select [TONE]
- Versions
- Zone Select [ZONE]
- Keypad Programming Options
- 76 -
KNG Mobile Operation
Cloning
Conventional Zones
The KNG Mobile radio can be set up to send or receive programmed information
from other BK Radio products via a cloning cable available from RELM Wireless.
Refer to the cloning cable instruction manual for cloning information between radios.
Control Lockout [LOCK]
Conventional and Trunked Channels
The KNG mobile oers two lockout settings, "Lock Keypad Only" and "Lock All
Controls".
Unlocked - Disables Control Lockout on all touch screen and button operations.
Lock Keypad Only - Locks all touch screen and button operations except the
three side buttons on the microphone.
Lock All Controls - Locks all functions programmed with the PC Radio Editor for
lockout.