User's Manual

ManualsBrandsRELM WIRELESS CORP. - BK RADIO ManualsElectronicsMOBILE LAND MOBILE TRANSCEIVER

Table Of Contents

Introduction
FCC Requirements
Industry Canada Compliance
Information and Options
Radio Controls
LCD Touch Screen
- Status Indicators
- Channel Information Display Options
- Programmable Button and Menu Options
Microphone Controls
Function Selection
- Touch Screen Selection
- Navigation Wheel Selection
- Menu Screen Selection
Channel/Zone Selection Options
Basic Operation
Trunking Channel Basic Operation
Command Zone Operation
- Building a Command Zone [CHAN+]
- Editing a Command Zone [CHAN-]
Code Guard/NAC Operation
- Code Guard Receive
- Code Guard Transmit
- Analog Squelch Control
- APCO Project 25 Digital Squelch Control
Mixed Mode Operation
Scan Options
- Channel Scan [SCAN]
- Channel Scan List [SCN+]
- Talkback Scan
- Dual Mode Scan [DSCN]
- Dual Mode Scan List [DSED]
- Enhanced Scan [ESCN]
- Priority Scan/System Scan [PSCN]
- Priority Channel Select [PRI]
- Vote Scan
- Zone Scan [ZSCN]
- Zone Scan List [ZSC+]
Encryption Operation
- Required Setup
- Transmit Secure [SEC]
- Transmit Encryption Key Selection [KEY]
- Encryption Keyset Selection [KEYST]
- Rekey Request [RKEY]
- Keyset Viewing and Selecting [KSET]
- Zeroizing [ZERO]
User Pick List Options
- TX/RX CxCSS Picklist [TXCG] [RXCG]
- TX/RX Network Access Code Picklist [TNAC] [RNAC]
- Talk Group ID Picklist [TGID]
- Encryption Key Picklist [KEY]
- Keyset Picklist [KSET]
Emergency Signaling
Messaging Options
- Text Messaging [TXT]
- Short Message Update [MSG]
- User Status Messaging [STS]
Paging and Call Alert
- Conventional Two-Tone/DTMF/MDC1200 Paging [MUTE]
- Call Alert Paging [ALRT]
- Radio Check [RCHK]
Other Functions & Options
- Backlight [LITE]
- Cloning
- Control Lockout [LOCK]
- Date and Time [DATE]
- Global Positioning [GPS]
- Hard Power Down [PWRD]
- Home [HOME]
- Inhibit/Uninhibit [INH]/UINH]
- Keypad Programming
- Minimum Volume [VOL]
- Monitor [MON]
- Nuisance Channel Delete [NUIS]
- Phone [PHN] and Hang Up [HANG]
- Radio Accountability Tone [RAT]
- Radio Info
- Repeater Talkaround [T/A]
- Send Alert Tone [SNDT]
- Send Signal [SEND]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXD]
- Transmit Power [PWR]
- Two-Tone Select [TONE]
- Versions
- Zone Select [ZONE]
Keypad Programming Options
- Entering Programming Mode
- Keypad Programming
- Call List Programming
- Code Guard Picklist Programming
- NAC Picklist Programming
- Talkgroup ID Picklist Programming

- 53 -

KNG Mobile Operation

The Zone Scan List operation can be assigned as a button or menu list item.

When Zone Scan List is assigned to a button [ZSC+], press the button to add or

remove the currently operating zone from the scan list.

When assigned as a menu item, open the menu and select the Zone you wish to add

or remove from the scan list. Press “+/-” to add or remove. Zones in the scan list will

be indicated with the  symbol.

Pressing "ESC" does not abandon changes.

Scanning Code Guarded Channels

Conventional Analog Channels

When a signal is detected, scanning stops while the radio checks for the proper

Code Guard value. If the signal contains the proper Code Guard value, the radio

receives the message. Otherwise, the radio resumes scanning immediately.

Transmitting with Scan On

The radio transmits on the channel selected by the Channel Selector knob unless

Talkback Scan is enabled (see Talkback Scan) or Priority Scan is on and Transmit on

Priority 1 is enabled (see Priority Scan).