User's Manual
Table Of Contents
- Introduction
- FCC Requirements
- Industry Canada Compliance
- Information and Options
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Trunking Channel Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Scan Options
- Encryption Operation
- User Pick List Options
- Emergency Signaling
- Messaging Options
- Paging and Call Alert
- Other Functions & Options
- Backlight [LITE]
- Cloning
- Control Lockout [LOCK]
- Date and Time [DATE]
- Global Positioning [GPS]
- Hard Power Down [PWRD]
- Home [HOME]
- Inhibit/Uninhibit [INH]/UINH]
- Keypad Programming
- Minimum Volume [VOL]
- Monitor [MON]
- Nuisance Channel Delete [NUIS]
- Phone [PHN] and Hang Up [HANG]
- Radio Accountability Tone [RAT]
- Radio Info
- Repeater Talkaround [T/A]
- Send Alert Tone [SNDT]
- Send Signal [SEND]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXD]
- Transmit Power [PWR]
- Two-Tone Select [TONE]
- Versions
- Zone Select [ZONE]
- Keypad Programming Options
- 52 -
KNG Mobile Operation
Zone Scan [ZSCN]
Conventional Channels
With Zone Scan enabled, the radio scans all programmed scan channels in zones
designated as Zone Scan zones whenever Channel Scan is on.
NOTE: Enabling Zone Scan while Channel Scan is o does not begin the scanning
process. Scan is turned on or o with the Channel Scan switch.
When Zone Scan is on (and when the Channel Scan is also on), the
Z
P
symbol will
be shown at the top of the LCD display. The icon is not displayed if only Zone Scan is
on. Zone Scan operation can be a button or menu list item.
While Zone Scanning, Priority Scan settings are disabled.
If allowed, the scanned zone list can be edited by the radio user.
(See Zone Scan List).
Zone Scan List [ZSC+]
Conventional Channels
The Zone Scan List allows the radio user to add or remove zones from the list of
zones to be scanned.