User's Manual

ManualsBrandsRELM WIRELESS CORP. - BK RADIO ManualsElectronicsMOBILE LAND MOBILE TRANSCEIVER

Table Of Contents

Introduction
FCC Requirements
Industry Canada Compliance
Information and Options
Radio Controls
LCD Touch Screen
- Status Indicators
- Channel Information Display Options
- Programmable Button and Menu Options
Microphone Controls
Function Selection
- Touch Screen Selection
- Navigation Wheel Selection
- Menu Screen Selection
Channel/Zone Selection Options
Basic Operation
Trunking Channel Basic Operation
Command Zone Operation
- Building a Command Zone [CHAN+]
- Editing a Command Zone [CHAN-]
Code Guard/NAC Operation
- Code Guard Receive
- Code Guard Transmit
- Analog Squelch Control
- APCO Project 25 Digital Squelch Control
Mixed Mode Operation
Scan Options
- Channel Scan [SCAN]
- Channel Scan List [SCN+]
- Talkback Scan
- Dual Mode Scan [DSCN]
- Dual Mode Scan List [DSED]
- Enhanced Scan [ESCN]
- Priority Scan/System Scan [PSCN]
- Priority Channel Select [PRI]
- Vote Scan
- Zone Scan [ZSCN]
- Zone Scan List [ZSC+]
Encryption Operation
- Required Setup
- Transmit Secure [SEC]
- Transmit Encryption Key Selection [KEY]
- Encryption Keyset Selection [KEYST]
- Rekey Request [RKEY]
- Keyset Viewing and Selecting [KSET]
- Zeroizing [ZERO]
User Pick List Options
- TX/RX CxCSS Picklist [TXCG] [RXCG]
- TX/RX Network Access Code Picklist [TNAC] [RNAC]
- Talk Group ID Picklist [TGID]
- Encryption Key Picklist [KEY]
- Keyset Picklist [KSET]
Emergency Signaling
Messaging Options
- Text Messaging [TXT]
- Short Message Update [MSG]
- User Status Messaging [STS]
Paging and Call Alert
- Conventional Two-Tone/DTMF/MDC1200 Paging [MUTE]
- Call Alert Paging [ALRT]
- Radio Check [RCHK]
Other Functions & Options
- Backlight [LITE]
- Cloning
- Control Lockout [LOCK]
- Date and Time [DATE]
- Global Positioning [GPS]
- Hard Power Down [PWRD]
- Home [HOME]
- Inhibit/Uninhibit [INH]/UINH]
- Keypad Programming
- Minimum Volume [VOL]
- Monitor [MON]
- Nuisance Channel Delete [NUIS]
- Phone [PHN] and Hang Up [HANG]
- Radio Accountability Tone [RAT]
- Radio Info
- Repeater Talkaround [T/A]
- Send Alert Tone [SNDT]
- Send Signal [SEND]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXD]
- Transmit Power [PWR]
- Two-Tone Select [TONE]
- Versions
- Zone Select [ZONE]
Keypad Programming Options
- Entering Programming Mode
- Keypad Programming
- Call List Programming
- Code Guard Picklist Programming
- NAC Picklist Programming
- Talkgroup ID Picklist Programming

- 40 -

KNG Mobile Operation

Code Guard/NAC Operation

Conventional Channels

Code Guard Receive

Analog channels programmed with a receive code guard will be heard only when the

proper carrier frequency and Code Guard value is received. When the transceiver

is in monitor mode, analog and mixed mode receive channels will also unmute even

without the proper Code Guard being received.

Code Guard Transmit

Whenever transmitting on an analog channel, any programmed sub-audible Code

Guard is transmitted. Depending on radio programming, the Code Guard can be the

default tone assigned to the channel or a tone selected from the Code Guard Picklist

(See Pick List Options.)

The frequency must be clear prior to transmitting on a Code Guarded channel. If

the LED Indicator is blinking green do not transmit. Busy Channel Lockout can be

programmed to disallow transmitting while a channel is busy.

Press the PTT switch. 1.

When the transmitter is on, the LED Indicator glows red and TX appears in

the display.