User's Manual

- 38 -
KNG Mobile Operation
Command Zone Operation
The KNG radio allows construction of Command Zones drawn from any of the
programmed channels in standard operating zones. Each zone is designated as a
Standard Operating Zone or a Command Zone with the PC Radio Editor software.
Building a Command Zone [CHAN+]
To build a Command Zone, the “Channel Add/Delete” function must be assigned to a
programmable button.
While operating in a standard zone press the “CHAN+” button to add the currently
selected channel to a command zone.
The list of available command zones will be displayed. Use the up/down arrows to
select the zone to add the channel or use the number keys to move directly to the
desired zone.
Pressing the “Enter” button copies the channel information to the rst available
channel slot in the selected command zone.
Example: If the command zone has three channels, the newly added channel will be
channel four.