User's Manual
Table Of Contents
- Introduction
- FCC Requirements
- Industry Canada Compliance
- Information and Options
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Trunking Channel Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Scan Options
- Encryption Operation
- User Pick List Options
- Emergency Signaling
- Messaging Options
- Paging and Call Alert
- Other Functions & Options
- Backlight [LITE]
- Cloning
- Control Lockout [LOCK]
- Date and Time [DATE]
- Global Positioning [GPS]
- Hard Power Down [PWRD]
- Home [HOME]
- Inhibit/Uninhibit [INH]/UINH]
- Keypad Programming
- Minimum Volume [VOL]
- Monitor [MON]
- Nuisance Channel Delete [NUIS]
- Phone [PHN] and Hang Up [HANG]
- Radio Accountability Tone [RAT]
- Radio Info
- Repeater Talkaround [T/A]
- Send Alert Tone [SNDT]
- Send Signal [SEND]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXD]
- Transmit Power [PWR]
- Two-Tone Select [TONE]
- Versions
- Zone Select [ZONE]
- Keypad Programming Options
- 36 -
KNG Mobile Operation
Trunking Channel Basic Operation
Some KNG radios are equipped with optional P25 Trunking capability. To determine
if your radio is trunking compatible, check the Options Label located on the back of
the radio. “KZA0579” indicates the trunking option is installed.
Trunking parameters and functions can only be programmed by qualied persons via
PC. Contact your system administrator or radio dealer for information on how your
radio is programmed.
System Registration
If the radio is powered on when a trunking channel is selected, the radio will attempt
to register with the selected trunking system.
The LED will ash twice upon successfully registering with the system and setting
talkgroup aliation.
If the aliation was unsuccessful, the LED will continue to ash.
If the radio is not in range of the system, “Out of Range” will be displayed and an
alert tone will sound every ten seconds.
If registration is refused or denied, a denied message and tone will appear briey
before switching to “Out of Range” mode.
After successful registration the programmed LCD display criteria is displayed.