User's Manual
Table Of Contents
- Introduction
- FCC Requirements
- Industry Canada Compliance
- Information and Options
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Trunking Channel Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Scan Options
- Encryption Operation
- User Pick List Options
- Emergency Signaling
- Messaging Options
- Paging and Call Alert
- Other Functions & Options
- Backlight [LITE]
- Cloning
- Control Lockout [LOCK]
- Date and Time [DATE]
- Global Positioning [GPS]
- Hard Power Down [PWRD]
- Home [HOME]
- Inhibit/Uninhibit [INH]/UINH]
- Keypad Programming
- Minimum Volume [VOL]
- Monitor [MON]
- Nuisance Channel Delete [NUIS]
- Phone [PHN] and Hang Up [HANG]
- Radio Accountability Tone [RAT]
- Radio Info
- Repeater Talkaround [T/A]
- Send Alert Tone [SNDT]
- Send Signal [SEND]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXD]
- Transmit Power [PWR]
- Two-Tone Select [TONE]
- Versions
- Zone Select [ZONE]
- Keypad Programming Options
- 119 -
KNG Mobile Operation
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
ESC CLEAR EDIT
Call ID Label
Channel 1 Label
Programming the Unit Call Label
Select "CLEAR" to reset the label. Use the
microphone keypad to enter a new label.
To edit individual characters select "EDIT".
Use "PREV" and "NEXT" to highlight the
character to change.
Select "ENTER" to set the label and return
to the previous step.
Programming the Unit Call ID
Select "CLEAR" to reset the P25 ID. Use the
microphone keypad to enter the new P25 ID.
To edit individual digits select "EDIT". Use
"PREV" and "NEXT" to highlight the digit to
change.
Select "ENTER" to set the ID and return to
the previous step.
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
ESC CLEAR EDIT
Call ID
12345
|