User's Manual
Table Of Contents
- Introduction
- FCC Requirements
- Industry Canada Compliance
- Information and Options
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Trunking Channel Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Scan Options
- Encryption Operation
- User Pick List Options
- Emergency Signaling
- Messaging Options
- Paging and Call Alert
- Other Functions & Options
- Backlight [LITE]
- Cloning
- Control Lockout [LOCK]
- Date and Time [DATE]
- Global Positioning [GPS]
- Hard Power Down [PWRD]
- Home [HOME]
- Inhibit/Uninhibit [INH]/UINH]
- Keypad Programming
- Minimum Volume [VOL]
- Monitor [MON]
- Nuisance Channel Delete [NUIS]
- Phone [PHN] and Hang Up [HANG]
- Radio Accountability Tone [RAT]
- Radio Info
- Repeater Talkaround [T/A]
- Send Alert Tone [SNDT]
- Send Signal [SEND]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXD]
- Transmit Power [PWR]
- Two-Tone Select [TONE]
- Versions
- Zone Select [ZONE]
- Keypad Programming Options
- 111 -
KNG Mobile Operation
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
ESC PREV NEXT
ENTER
Bandwidth
Narrowband
Wideband
Analog Bandwidth
Bandwidth selection applies only to analog
operation. Digital operation is always
narrowband regardless of setting.
Use "PREV" and "NEXT" to select
Narrowband or Wideband.
Select "ENTER" to set the mode.
(Please see "Notice" on Page 2.)
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
ESC PREV NEXT
ENTER
Tx Power
Low Power
Hi Power
Selectable
Transmit Power
Individual channels can be designated to
always transmit in low or high power.
Use "PREV" and "NEXT" to select "Low" or
"High" power.
Choosing "Selectable" allows the transmit
power to selected by a programmed Tx
Power switch.
Select "ENTER" to set the mode.