User's Manual
Table Of Contents
- Introduction
- FCC Requirements
- Industry Canada Compliance
- Information and Options
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Trunking Channel Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Scan Options
- Encryption Operation
- User Pick List Options
- Emergency Signaling
- Messaging Options
- Paging and Call Alert
- Other Functions & Options
- Backlight [LITE]
- Cloning
- Control Lockout [LOCK]
- Date and Time [DATE]
- Global Positioning [GPS]
- Hard Power Down [PWRD]
- Home [HOME]
- Inhibit/Uninhibit [INH]/UINH]
- Keypad Programming
- Minimum Volume [VOL]
- Monitor [MON]
- Nuisance Channel Delete [NUIS]
- Phone [PHN] and Hang Up [HANG]
- Radio Accountability Tone [RAT]
- Radio Info
- Repeater Talkaround [T/A]
- Send Alert Tone [SNDT]
- Send Signal [SEND]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXD]
- Transmit Power [PWR]
- Two-Tone Select [TONE]
- Versions
- Zone Select [ZONE]
- Keypad Programming Options
- 108 -
KNG Mobile Operation
Receive CTCSS/CDCSS Code Guard (cont.)
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
ESC CLEAR EDIT
Rx Guard
123.0 Hz
To enter a CTCSS tone, select "Tone" form
the menu.
Select "CLEAR" to reset the tone to all
zeros. Use the microphone keypad to enter a
new frequency.
To edit individual digits select "EDIT". Use
"PREV" and "NEXT" to highlight the digit to
change.
Select "ENTER" to set the frequency and
return to the previous step.
Channel 16
Secure One
155.645 MHz
Z
P
P
H
✓
P
1
TXD
Ø
ESC CLEAR EDIT
INV
Rx Guard
f
D000-
Digital
To enter a CDCSS value, select "Digital"
form the menu.
Select "CLEAR" to reset the code to all
zeros. Use the microphone keypad to enter a
new code. Use "INV" to invert the code.
To edit individual digits select "EDIT". Use
"PREV" and "NEXT" to highlight the digit to
change.
Select "ENTER" to set the tone and return to
the previous step.