User's Manual

- 95 -
KNG Mobile Operation
System Priority 1 Channel
A priority channel can be assigned on a system wide basis. If allowed, a system
priority channel will be monitored during priority scan regardless of the currently
operating zone.
When set to "O󰀨", the Priority 1 Channel is designated by the currently selected
zone setting. (See Programming Zone Parameters)
When set to "Use Main", the channel selected by the channel knob is the Priority 1
channel.
Choose "Select" to designate a specic channel as the System Priority 1 channel.
Use "PREV" and "NEXT" to highlight the Zone of the desired Priority channel.
Press "ENTER" to set the zone.
Use "PREV" and "NEXT" to highlight the desired Priority channel. Press "ENTER"
to nalize the selection.
Transmit on Priority 1
If Transmit on Priority 1 is "On", the radio will transmit on the programmed Priority 1
channel whenever priority scan is turned on.
Use "PREV" and "NEXT" to highlight the desired Operation. Press "ENTER" to
nalize the selection.