User's Manual
Table Of Contents
- Introduction
- FCC Requirements
- Industry Canada Compliance
- Information and Options
- Radio Controls
- LCD Touch Screen
- Microphone Controls
- Function Selection
- Channel/Zone Selection Options
- Basic Operation
- Trunking Channel Basic Operation
- Command Zone Operation
- Code Guard/NAC Operation
- Mixed Mode Operation
- Scan Options
- Encryption Operation
- User Pick List Options
- Emergency Signaling
- Messaging Options
- Paging and Call Alert
- Other Functions & Options
- Backlight [LITE]
- Cloning
- Control Lockout [LOCK]
- Date and Time [DATE]
- Global Positioning [GPS]
- Hard Power Down [PWRD]
- Home [HOME]
- Inhibit/Uninhibit [INH]/UINH]
- Keypad Programming
- Minimum Volume [VOL]
- Monitor [MON]
- Nuisance Channel Delete [NUIS]
- Phone [PHN] and Hang Up [HANG]
- Radio Accountability Tone [RAT]
- Radio Info
- Repeater Talkaround [T/A]
- Send Alert Tone [SNDT]
- Send Signal [SEND]
- Squelch Adjust [SQL]
- Site Display [STDS]
- Site Lock [STLK]
- Site Search [STSR]
- Surveillance Mode [SURV]
- Transmit Digital [TXD]
- Transmit Power [PWR]
- Two-Tone Select [TONE]
- Versions
- Zone Select [ZONE]
- Keypad Programming Options
- 91 -
KNG Mobile Operation
Keypad Programming Options
Conventional Channels, Zones and Systems Only
NOTE: Radio programming is to be performed only by authorized personnel. Any or
all programmable functions are password protected to prevent unauthorized access.
Programmable categories include Individual P25 ID Quick Call/Receive List, User
Tone List, User NAC List, User Talk Group ID List and Keypad Programming of
Channel, Zone, Global and System parameters.
Entering Programming Mode
Select "Keypad Programming" from the Menu List.
Enter the User or Administrator password at the prompt.
Select programming menu from the list of available options:
Keypad - Used for programming Channel, Zone, System and Global radio
information including frequencies, labels, priority scan rate, etc.
Call List - Used to edit labels and P25 IDs in the stored User Call List.
User Tones - Used to edit the 32 User Selectable CTCSS/CDCSS tones list.
User NACs - Used to edit the 32 User Selectable NACs list.
User TGIDs - Used to edit the 32 User Selectable TGIDs list.