Safety data sheet

Safety Data Sheet according to Regulation
(EC) No. 1907/2006 (REACH)
Relicon-Hardener 485-04
Print date 18.04.2016
Revision date 18.04.2016
Version 1.0
7.3 Specific end use(s)
No data available
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
No data available
8.2 Exposure controls
Appropriate engineering controls
Technical measures to prevent exposure
refer to chapter 7. No further action is necessary.
Personal protection equipment
Eye/face protection
Suitable eye protection:
Eye glasses with side protection
Skin protection
Skin protection
Suitable gloves type:
Gloves with long cuffs
Suitable material:
CR (polychloroprene, chloroprene rubber)
NBR (Nitrile rubber)
Thickness of the glove material >0,4 mm
Wearing time with occasional contact (splashes): >480 min
additional hand protection measures
Take recovery periods for skin regeneration. Check leak tightness/impermeability prior to use.
Body protection:
Suitable protective clothing:
Chemical protection clothing
Respiratory protection
Respiratory protection necessary at:
insufficient ventilation
Suitable respiratory protection apparatus:
Filtering Half-face mask (DIN EN 149)
ABEK-P2
Suitable respiratory protection apparatus:
Self-contained respirator (breathing apparatus) (DIN EN 133)
remark
If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn.
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
Appearance
Physical state
liquid
Colour
black
Page 6/10