User guide

What can I do if a client cannot access the WLAN?

. 1 If interference seems to be the problem, adjust the position of the EC5805 or

move it to a more favorable location.

. 2 Check and record the following settings for your client and your EC5805: SSID,

WEP type, and key. The SSID of the client must be set to ANY or to the same

value as that of the EC5805. The WEP type and key of the client must be the

same as that of the EC5805. Change the settings as needed.

. 3 Check whether the WLAN MAC Filter function is enabled on the EC5805. If the

function is enabled, ensure that all relevant parameters are set correctly. See

WLAN MAC Filter on the web management page for more information.

What can I do if I forgot the default IP address of the web

management page?

. 1 If you have obtained an IP address automatically, enter http://E5.home and

. 2 Restore the factory defaults.