User guide

Note: Press and hold the Wi-Fi/WPS button until the Wi-Fi/WPS indicator is off. Wi-
Fi is now disabled.
Establishing a WPS Connection
If a Wi-Fi client connected to the EC5805 supports the WPS function, the EC5805
can generate a network key without manual input. To establish a WPS connection,
perform the following steps:
. 1 Power on the EC5805.
. 2 Start the client.
. 3 Enable the WPS function of the EC5805.
Note: After Wi-Fi is enabled, press and hold the Wi-Fi/WPS button. When Wi-
Fi/WPS indicator becomes off first and then blinking green. WPS is now enabled.
. 4 Enable the WPS function of the client.
Note: For client Wi-Fi operations, see the clients’ user guide.