Instruction manual
05
HOW TO USE YOUR STEAM CLEANER
1. Removethewatertankcap(6),andllthetank(6)uptoamaximumof1.5
quartsofwater(1.5Lor6cups).Securethecapuntilsnug.
2. Connect the electrical cord to the main power outlet.
3. Connecttheexibletube(10)totheappropriateaccessorythatyouwishtouse.
4. Switchonthemainswitch(1)byturningittothe“boiler”position(the2nd
positiononthedial)theworkingcontrollight(2)willlighton.Whenthesteam
controllightlightsup(3),thesteamcleanerisreadytouse.
5. When using the steam cleaner for the first time, we recommend that you allow
thesteamtocomeout(for10-15seconds)bypressingthesteamkeyon
thespraygun(10),inordertoeliminateanypossibleresiduethatmayhave
been built up by treatments during the production process.
6. Duringuse,theorangesteamreadywarninglight(3)willalternatelyturnon
and off. This is normal because it indicates that steam is being generated in
the boiler.
7. When you are finished using the steam cleaner turn the main switch off.
8. Itissafetoleavewaterinthepressuretankwhenthesteamcleanerisnot
inuse.Ifitisforanextendedperiodoftime(months)thenitisbesttoush
out the remaining water. To do so, follow the water removal instructions
as outlined in the maintenance of the boiler section.
THIS MODEL IS PROVIDED WITH THE
FOLLOWING FEATURES
RED CONTROL LIGHT (4)
Aredwarninglightsignalsthatthewaterneedstoberelled.Ifyouwishtocontinue
steamcleaning,seethe“llingyourtank”instructions.
STEAM REGULATION (ON HANDLE)
Withthesteamdeliveryadjustment,itispossibletoselectthesteamquantitythat
youwishduringyourcleaningfromminimumtomaximum.
PRESSURE GAUGE (8)
The pressure gauge indicates the operating pressure of the steam cleaner. If the
needle is in the green section, the product is operating normally. If the needle
is continuously in the red section, reduce amount of steam being used, if this does
not correct the problem the steam cleaner may require service. Please contact
the place of purchase for service.