Specifications

3.2 Equipment Specific Safe Operating Procedure (SOP)
1. Before Sewing
Picture 1
a) Put on PPEs
b) Connect the foot pedal cable into the machine.
c) Plug the power cable into the socket.
d)
e) Uninstall the bobbin (see picture 2) from the bobbin case and wind the
bobbin with the thread by running the machine.
f) Keep your fingers away from the needle and the thread when winding the
bobbin.
g) Place the thread spool on the spool pin.
h) Take the thread end and pass it through the designated threading points
(through the tension assembly, take up lever
i) Put the thread through the eye of the needle with caution.
j) Use the switch to set the needle position and stitch width (see picture 3)
Picture 2
Picture 3