Specifications

2.0 Pre-use Inspection Checklist
Check
Y
N
N/A
1
Is the power cord free of frays and damage?
2
Is the area around the heat press free of slip/trip hazards?
3
Is the surface area of the heater platen free of defects?
4
Does the arm handle and the upper heat platen move freely without obstruction?
5
Has the clamping arm pressure been adjusted? (This will allow you to easily move the
clamping arm up and down).
6
Has the temperature and the timer been set? (150F to 350 F).
7
Is the material/fabric to be pressed ready?
Comments/Corrective Action:
3.0 Safe Operating Procedure (SOP)
This procedure is outlined as follows:
 General Safety Guidelines
 Equipment Specific Safety Operating Procedure
3.1 General Safety Guidelines
Before using the machine, perform the following general safety checks:
a) Make sure you understand all of the instructional material before operating this equipment. Failure to follow safety
instruction and warnings may result in serious personal injury, fire or property damage.
b) If you have any questions or uncertainties, please ask your studio technician before use.
c) Long hair, scarves, loose clothing, jewellery and ties pose an entanglement hazard. Please make sure these are all
constrained prior to operating the equipment.
d) Make sure the cord is kept away from heat, oil, sharp edges or moving parts and does not pose a trip hazard.
e) Do not conduct any maintenance or repairs on this equipment. In case of a defect, contact your technician.
f) Do not remove or render machine guarding ineffective in any way.
g) Ensure the work area is both well-lit and organized.