Specifications

2.0 Pre-use Inspection Checklist
Check
Y
N
N/A
1
Are the power cords free of frays and damage?
2
Is the area around the steamer free of slip/trip hazards?
3
Has the debris/material from previous operations been removed?
4
Is the water reservoir filled with water?
5
Is the insulation in place?
6
Does the safety switch work properly?
Comments/Corrective Action:
3.0 Safe Operating Procedure (SOP)
This procedure is outlined as follows:
 General Safety Guidelines
 Equipment Specific Safety Operating Procedure
3.1 General Safety Guidelines
Before using the machine, perform the following general safety checks:
a) Make sure you understand all of the instructional material before operating this equipment. Failure to follow safety
instruction and warnings may result in serious personal injury, fire or property damage.
b) If you have any questions or uncertainties, please ask your studio technician before use.
c) Long hair, scarves, loose clothing, jewellery and ties pose an entanglement hazard. Please make sure these are all
constrained prior to operating the equipment.
d) Do not conduct any maintenance or repairs on this equipment. In case of a defect, contact your technician.
e) Do not remove or render machine guarding ineffective in any way.
f) Ensure the work area is both well-lit and organized.