Specifications

3.2 Equipment Specific Safe Operating Procedure (SOP)
1. Preparation for Steaming
Picture 1
a) Get assistance from the class technician before using the steamer.
b) Prepare the fabric for steaming.
c) Separate the fabric from the paper and then roll it onto the spring core
(see picture 1).
d) Add water to the steamer (see picture 2), the water level lights will
illuminate when the machine is full.
e) Place the rolled fabric in the center of the Steam Jet.
f) Caution: The steamer door is very heavy.
g) Secure the pressure door by hand tightening the four knobs and then close
the outer lockout door (see picture 3).
h) Do not operate the Steam Jet unless the outer safety door is closed.
Picture 2
Picture 3
2. Operating the Steam Jet
Picture 4
a) Set the temperature and the time on the steamer (see picture 4).
b) Start the cycle for the machine.
c) Lock the door and stay away from the machine, as it gets hot
d) If anything unexpected occurs, immediately disable the equipment by
using the emergency shut-off switch and/or removing the attachment plug.