Instruction manual

19
• Thisindustrialsteamvacuum
generatordoesnotrequireany
particular maintenance. It may be
necessary to empty the water out
of the boiler to remove any lime
scale deposits. Loosen the cap
on the base using the special tool
supplied (3 Fig. 1). Only do so
when unit is cold.
• Besuretore-closethecap
once the water has been totally
discharged (Fig. 28).
CLEANING/EMPTYING THE
VACUUM CLEANER
• Aftereachuse,orwhenone
notices a change in the running
noise or should it fail to vacuum,
it will be necessary to empty the
drum (Fig. 29).
• Removethevacuumfromits
compartment (Fig. 30).
• Unlockthetwosidehooksof
the vacuum device and lift the
vacuum head.
• Emptyandcleanthevacuum
cleaner (Fig. 30).
• Removethefilter(1Fig.31),
installed below the head, by
loosening the fixing cap (2).
• Cleanwithrunningwaterchecking
whether it is intact. If visibly
damaged, replace it.
• Replacethevacuum
compartment (Fig. 31/30)
making sure to insert the plug into
the relative socket should it have
been previously removed.
(Fig. 29)
(Fig. 30)
(Fig. 31)