Instruction manual

13
10. Unwind the cable and insert the
plug into the wall socket of a
suitable wiring system. Unless
otherwise stated the machine
is suitable for 120V-60Hz
connection (Fig. 9).
CAUTION! We will not be liable for
any damage caused by operating
conditions with voltages other
thanrequired!Makesurethatthe
plug is grounded so as to avoid
any problems with the generator
function (Fig 9).
GENERAL INFORMATION
1. Main on/off switch
2. Pressure gauge
3. Steam pressure light
4. Low water level indicator
5. Chemical ejection indicator
6. Steamquantityregulator
7. Chemical switch
8. Flexible hose connector
• Turnontheboilerswitch(1
Fig. 11); the pressure indicator
green light will flash for the time
requiredtoreachthemaximum
pressure level, after which it will
stabilize and remain on (3).
• Absenceofwaterinsidethe
tank is indicate by the flashing
of the indicator (2) and by an
acoustic signal on the dashboard.
Immediately undertake to fill
the tank.
• Afterrefillingthetankwith
water the machine to will
return automatically to normal
functioning.
(Fig. 9)
(Fig. 10)
(Fig. 11)