Instruction manual

10
TROUBLESHOOTING
Donotoperatethesteamcleanerwithadamagedcord,plugorifthesteam
cleanerhasbeendroppedordamaged.Toavoidriskofelectricshock,donot
disassemble or attempt to repair the unit on your own. Return the unit to Reliable
Corporation(seewarranty)forexamination,repairorreplacement.
PROBLEM
No steam is released through
the steam fittings.
Dropsofwaterleakfromthe
attachments.
Dirtywateriscomingout.
Not enough steam pressure.
REMEDY
1. Turnsteamunitontothe
2nd position.
2. Put required amount of
waterintotank.
3. Plug unit into outlet.
4. Waitforlight(3)toturnon.
1. Waitforlight(3)toturnon.
2. Letwaterrunthroughsys-
tem until steam comes out.
1. Followcleaninginstructions
inbook.
1. Turnthedialuntilthede-
sired pressure is reached.
POSSIBLE CAUSES
1. Steam unit is not turned on.
2. Watertankisempty.
3. Unitisnotpluggedin.
4. Generator is not fully
heated.
1. Unitisnotfullyheated.
2. Condensation was created
from non-use.
1. Scale may have built up.
1. Thedialonthehandlemay
be set too low.