Operator`s manual

Q-DL-2100 Operatorʼs Manual
Quaesta Instruments, LLC [phone] • Email: [e-mail]
32
Setting the Terminal Emulation
Select File->Properties and then select the Settings tab. Select VT100 for Emulation. Make
sure the “Backscroll buffer lines” parameter is set to 500, the maximum number.
Figure B-6.
Setting the Terminal Properties
Select the “Terminal Setup…” button in the Connection Properties window (displayed in
Figure B-7. A window titled “Terminal Settings” will be displayed. Configure it for 132
column mode as below.
Figure B-7