Operator`s manual

Q-DL-2100 Operatorʼs Manual
Quaesta Instruments, LLC [phone] • Email: [e-mail]
30
You will be presented with a “Connection Description” window of the form shown in Figure
B-2.
Figure B-2.
Enter a name for the connection and click OK.
At the “Connect To” window, shown in Figure B-3, select the appropriate COM Port
(determined in Appendix A, Step 3 if using the dataloggerʼs USB COM port) from the
“Connect using: ” pull-down list.
Figure B-3.
Select OK and a window similar to Figure B-4 will be displayed. Select the appropriate COM
port parameters depending on whether the dataloggerʼs USB COM port or the RS-232
interface jack is being used for the terminal interface.