Operator`s manual

Q-DL-2100 Operatorʼs Manual
Quaesta Instruments, LLC [phone] • Email: [e-mail]
25
STEP 3. Determine USB Virtual COM Port setting.
After Step 2 is complete, the USB Virtual COM Port should be installed. This will make the
USB connection to the data logger behave as a Windows serial port, otherwise known as a
COM port. To verify this, leave the USB port on the PC connected to the COM connector on
the data logger. Now go to the Windows Control Panel (accessible from the Start Menu). In
the Classic View mode, the Control Panel window will look something like that shown in
Figure A-6.
Figure A-6