Operator`s manual

Q-DL-2100 Operatorʼs Manual
Quaesta Instruments, LLC [phone] • Email: [e-mail]
10
1.6 Q-DL-2100 Electrical Connections: Back Panel, cont.
Below is a table of pinouts for the RJ45 connectors on the back panel and the corresponding
wire colors for an EIA/TIA 568B type patch cable. Appropriate changes should be made if
an EIA/TIA 568A type patch cable is used instead.
Table 1.1 RJ45 Connector wiring diagram for EIA/TIA 568B type patch cable.
ANALOG OUT
1A Ground Orange/White
2A AnalogOut-1 Orange
3A Ground Green/White
4A AnalogOut-2 Blue
5A Ground Blue/White
6A AnalogOut-3 Green
7A Ground Brown/White
8A AnalogOut-4 Brown
ANALOG IN NOTE: 5 Volts Maximum
1B Ground Orange/White
2B AnalogIn-1 Orange
3B Ground Green/White
4B AnalogIn-2 Blue
5B Ground Blue/White
6B AnalogIn-3 Green
7B Ground Brown/White
8B AnalogIn-4 Brown
DIGITAL I/O
1C Ground Orange/White
2C DigitalI/O-1 Orange
3C Ground Green/White
4C DigitalI/O-2 Blue
5C Ground Blue/White
6C DigitalI/O-3 Green
7C Ground Brown/White
8C DigitalI/O-4 Brown
SENSORS
1D Ground Orange/White
2D 5 Volts Orange
3D Ground Green/White
4D External Temp Sensor Blue
5D Ground Blue/White
6D Humidity Sensor Clock Green
7D Ground Brown/White
8D Humidity Sensor Data Brown
RELAYS NOTE: 30V, 1.2A Maximum
1E RelayB-1 Orange/White
2E RelayA-1 Orange
3E RelayB-3 Green/White
4E RelayA-2 Blue
5E RelayB-2 Blue/White
6E RelayA-3 Green
7E RelayB-4 Brown/White
8E RelayA-4 Brown
RS-232 NOTE: TX and RX are with respect to the Data Logger
1F Ground Orange/White
2F TX - A Orange
3F Ground Green/White
4F RX - A Blue
5F Ground Blue/White
6F TX - B Green
7F Ground Brown/White
8F RX - B Brown