Tus neeg siv phau ntawv

10/2021 · User Manual Version 1.0 · valid from firmware version 3.1.22
8
WEBLOG 250
4. Operating instructions
4.1 Administrator mode
The WebLog starts the operating system and then the application software after the power has been supplied
to the device. After the boot procedure the login screen appears on the display. The WebLog can be operated
either by the touchscreen on the device or a web browser (e.g. Firefox) using the network interface. The
graphical user interfaces are designed similar, however the initial setup of the network configuration must be
done by the touchscreen to enable an access from a browser to the WebLog. Please click on the touchscreen
into the input field for password and enter the admistrator password (factory default: 00001767) using the
virtual keyboard, which opens automatically.
The WebLog shows the
serial number (SN) and
a user definable
identification string (=
ID) on the login screen.
The input from the virtual keyboard of the touchscreen will be accepted with the “OK” button and the entered
string will be written into the input field.